How it works: rope-way switch rotary cam structure, pull the switch on either side or both sides of the rope while pulling, can be driven cam, the switching action conversion, at the same time send a stop alarm signal. The rope switch fixed on the bracket, and then welded to the rack. 2 wire rope system on the swing arm of the switch body (wire rope recommended use PESG-type moisture-proof, flame retardant, acid and alkali resistant coated steel wire rope clips) with a rope, and on both sides of the switch and near the mounting bracket ring, and then install a prop ring every 3 meters, in order to avoid vertical deflection is too large, to ensure the normal use of the switch. The switch work properly premise, as taut as possible on both sides of the rope and then minimize the vertical deflection of the wire rope. 4 the slope tape machine, shall, as appropriate, to shorten the length of the wire rope \ switching distance. Main technical indicators : Model Contact capacity number of contacts reset weight HFKLT2 AC38V 5A 2 normally open normally closed type Ⅰ automatic reset type II self-locking, manual reset the 1.3 Kg FKLT2-Y manually three main purposes: rope-way switch for two-way action, The switch can be installed on both sides of the wire rope, belt conveyor run accident scene, pulling both sides of the rope, the emergency stop of the system, timely and effective manner to avoid the enlargement of the accident, to protect the safety of personnel or equipment, to ensure safety in production purpose.