FJQ-32/52 split / separate rope cut off the main power source (with electric hand pump can be), most of the working cylinder, slide and cutting blade, it has a reasonable structure, operation cut fast, effort, etc., especially due to the split structure, which avoid wounding phenomenon previously caused due to careless operation rope thrown bombs. The cutter will not only cut ￠ 32-52 mm wire rope, but also cut off ￠ 20 mm below the specifications of the round bar. The cutter is a national initiative, widely used in metallurgy, mining, petroleum, bridges and other engineering sectors. Use the fuel tank and the pump with a high-pressure hose connected, and the oil return bolts tightened. 2, the movable pin set aside, turn the slide, and then will be cut the rope into the slot (direct penetration), the excellent movable pin. Up and down pushed the handle, the blade forward, the cutting operation can be realized. 4, the forward movement is completed, unscrew the oil return bolts, the knife return, ready for the next action. Parameter model range of cutting blade stroke maximum cutting force of the rated working pressure handle operating force Dimensions FJQ-32 ￠ 8-32mm 40mm 16T 63MPa ≤ 35KN 600 * 230 * 120mm FJQ-52 ￠ 8-52mm 58mm 50T 63MPa ≤ 38kN 600 * 230 * 120mm